ESP32 and SHT31 sensor example

SHT31 is the next generation of Sensirion’s temperature and humidity sensors. It builds on a new CMOSens® sensor chip that is at the heart of Sensirion’s new humidity and temperatureplatform.

The SHT3x-DIS has increased intelligence, reliability and improved accuracy specifications compared to its predecessor. Its functionality includes enhanced signal processing, two distinctive and user selectable I2C addresses and communication speeds of up to 1 MHz. The DFN package has a footprint of 2.5 x 2.5 mm2 while keeping a height of 0.9 mm.

This allows for integration of the SHT3x-DIS into a great variety of applications.

Features

Fully calibrated, linearized, and temperature compensated digital output
Wide supply voltage range, from 2.4 V to 5.5 V
I2C Interface with communication speeds up to 1 MHz and two user selectable addresses

I bought the following module

SHT31

Parts Required

Here are the parts I used

The sensor you can pick up in the $6 price range – you can connect to the sensor using a standard header the classic dupont style jumper wire.

Name	Link
ESP32		Aliexpress link Amazon Ebay
SHT31		Aliexpress link Ebay link Amazon Link
Connecting cables		Aliexpress link Amazon Ebay

Layout

If you’re using an Lolin32 simply connect the VIN pin to the 3v3 voltage pin, GND to ground, SCL to I2C Clock (22) and SDA to I2C Data (21).

Here is a layout drawn up in fritzing to illustrate this

lolin32 and sht31

Code

This example uses the adafruit sht31 library – https://github.com/adafruit/Adafruit_SHT31

#include <Arduino.h>
#include <Wire.h>
#include "Adafruit_SHT31.h"

Adafruit_SHT31 sht31 = Adafruit_SHT31();

void setup()
{
Serial.begin(9600);
if (! sht31.begin(0x44))
{
Serial.println("Couldn't find SHT31");
while (1) delay(1);
}
}

void loop()
{
float t = sht31.readTemperature();
float h = sht31.readHumidity();

if (! isnan(t))
{
Serial.print("Temp *C = "); Serial.println(t);
}
else
{
Serial.println("Failed to read temperature");
}

if (! isnan(h))
{
Serial.print("Hum. % = "); Serial.println(h);
}
else
{
Serial.println("Failed to read humidity");
}
Serial.println();
delay(1000);
}

Output

Open the serial monitor and you should see something like this

Temp *C = 19.46
Hum. % = 45.33

Temp *C = 19.71
Hum. % = 46.29

Temp *C = 24.44
Hum. % = 61.38

Temp *C = 26.48
Hum. % = 71.29

Temp *C = 27.99
Hum. % = 76.13